Quick view SircleLam | sku: 005891 SRL-E 27" Feed Table with Lock Switch MSRP: Was: Now: $64.35 Add to Cart Compare Quick view sku: 636600189 636600189- Power Cord MSRP: Was: Now: $28.80 Add to Cart Compare Quick view sku: 005742 639400018- Infrared Non-Contact Heat Sensor MSRP: Was: Now: $41.32 Add to Cart Compare Quick view sku: 006234 633200265- Film Tension Saddle MSRP: Was: Now: $14.95 Add to Cart Compare Quick view sku: 005574 634400003- Teflon Bushing for SRL-2700 Film Mandrel MSRP: Was: Now: $4.95 Add to Cart Compare Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 636600189 636600189- Power Cord MSRP: Was: Now: $28.80 Add to Cart Compare Quick view sku: 005742 639400018- Infrared Non-Contact Heat Sensor MSRP: Was: Now: $41.32 Add to Cart Compare Quick view sku: 006234 633200265- Film Tension Saddle MSRP: Was: Now: $14.95 Add to Cart Compare Quick view sku: 005574 634400003- Teflon Bushing for SRL-2700 Film Mandrel MSRP: Was: Now: $4.95 Add to Cart Compare Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 005742 639400018- Infrared Non-Contact Heat Sensor MSRP: Was: Now: $41.32 Add to Cart Compare Quick view sku: 006234 633200265- Film Tension Saddle MSRP: Was: Now: $14.95 Add to Cart Compare Quick view sku: 005574 634400003- Teflon Bushing for SRL-2700 Film Mandrel MSRP: Was: Now: $4.95 Add to Cart Compare Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 006234 633200265- Film Tension Saddle MSRP: Was: Now: $14.95 Add to Cart Compare Quick view sku: 005574 634400003- Teflon Bushing for SRL-2700 Film Mandrel MSRP: Was: Now: $4.95 Add to Cart Compare Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 005574 634400003- Teflon Bushing for SRL-2700 Film Mandrel MSRP: Was: Now: $4.95 Add to Cart Compare Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 005577 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel MSRP: Was: Now: $9.95 Add to Cart Compare Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 004750 631800786- Front Silicone Roller MSRP: Was: Now: $169.00 Add to Cart Compare Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 005578 638200455- SRL2700/685 Infrared Heater Assembly MSRP: Was: Now: $65.95 Add to Cart Compare Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 637400292 637400292- Power (On/Off) Rocker Switch MSRP: Was: Now: $12.95 Add to Cart Compare Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 005614 631800336- Front Silicone Roller MSRP: Was: Now: $379.44 Add to Cart Compare Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 635300074 635300074- Transformer GM6635A-12 MSRP: Was: Now: $46.95 Add to Cart Compare Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: 635000002 635000002- 36 Volt Motor MSRP: Was: Now: $80.10 Add to Cart Compare Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view SRL-E 27" Feed Table with Lock Switch Fits SRL-2700 Laminators MSRP: Was: Now: $64.35 Add to Cart Compare Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 636600189- Power Cord • Power Cord for GMP Excelam Series & SircleLam Roll Laminators • 14/3, SJT, black • 7ft in length • End one: NEMA 5-15P • End two: ROJ Cut & Terminaled • Used on GMP Excelam 655, 655R, 685, 1080, &... MSRP: Was: Now: $28.80 Add to Cart Compare Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 639400018- Infrared Non-Contact Heat Sensor 639400018- Infrared Non-Contact Heat Sensor (ROHS) • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GMP Excelam 655,... MSRP: Was: Now: $41.32 Add to Cart Compare Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 633200265- Film Tension Saddle • Fits SircleLam SRL-2700-HR & SRL-2700-Plus with Serial Numbers Ending in "K" • Fits Smartload 12- Upper Right Only • Saddle Only. Tension Knob Sold Separately. MSRP: Was: Now: $14.95 Add to Cart Compare Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 634400003- Teflon Bushing for SRL-2700 Film Mandrel 634400003- Teflon Bushing for SRL-2700 Film Mandrel is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the keyhold slot on the machines metal frame. MSRP: Was: Now: $4.95 Add to Cart Compare Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 633200266- Film Shaft Core (L) Nylon Washer for Film Mandrel The 633200266 Film Shaft Core (L) Nylon Washer is located on the end of the SirleLam SRL-2700-HR or SRL-2700-Plus film mandrel. It is the end that fits into the black tension saddle and helps create tension on the film. • Parts is either Black... MSRP: Was: Now: $9.95 Add to Cart Compare Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 631800786- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for 27" Roll Laminators • 631800786 roller is used for both the top and bottom heat rollers • Fits SircleLam SRL-2700-HR, SRL-2700-Plus, SircleLam Eclipse 27 • Fits GMP Excelam 685 MSRP: Was: Now: $169.00 Add to Cart Compare Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 638200455- SRL2700/685 Infrared Heater Assembly • Replacement Quartz (Glass) Heater for SircleLam 27" Roll Laminators SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & QuickPrint 27 • Replacement Quartz (Glass) Heater for GMP Excelam 685 27" Roll Laminator MSRP: Was: Now: $65.95 Add to Cart Compare Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 637400292- Power (On/Off) Rocker Switch • On/Off Power Switch for SircleLam SRL-2700-HR, SRL-2700-Plus, Eclipse 27, & 1080R QuickPrint Roll Laminators • On/Off Power Switch for GMP Excelam 655, 655R, 1080, & 1080R Roll Laminators • On/Off Power Switch for GBC Catena 65... MSRP: Was: Now: $12.95 Add to Cart Compare Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 631800336- Front Silicone Roller • 2" Diameter Front Silicone (Heat) Roller for GMP Excelam 1080 & 1080R MSRP: Was: Now: $379.44 Add to Cart Compare Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view 635300074- Transformer GM6635A-12 • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Input 110/120 Volts • Output 36 Volts AC for... MSRP: Was: Now: $46.95 Add to Cart Compare Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
Quick view 635000002- 36 Volt Motor • For use in KLAI-Co Roll Laminators starting with the serial number "G" • For use in Sircle Roll Laminators SRL-2700-HR, SRL-2700-Plus, & Eclipse 27 • For use in GBC Catena 65 • Output 36 Volts MSRP: Was: Now: $80.10 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
